Wholesale price stable quality Mono-Crystalline 150W Solar Panel to Seattle Manufacturer
Short Description:
We are proud of the high customer satisfaction and wide acceptance due to our persistent pursuit of high quality both on product and service for Wholesale price stable quality Mono-Crystalline 150W Solar Panel to Seattle Manufacturer, We welcome you to join us in this path of creating a prosperous and efficient business together.
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Dodocool have released this portable USB solar panel with built in powerbank! Simply place the panel in the sun during the day and consume the power from the built in battery whenever you want!
UK: https://www.amazon.co.uk/dp/B01G8MLY2G/
Coupon code: PFNCWIXI
Final price: ￡30.99 （Was ￡39.99）
Valid until 20th, June.
CA: https://www.amazon.ca/dp/B01G8QACLG/
Coupon code :RV667FNU
Final price: CDN$53.99 (Was CDN$65.99 )
Valid until 20th, June.
US: https://www.amazon.com/dp/B01G8QACLG/
Although the unit is advertised as having a 10,000 mAh built in battery, my testing with a USB watt meter and 1A load showed the battery to be closer to 7000 mAh. The battery is lithium polymer which is how they can retain the slim profile of the portable solar unit.
Due to the way the solar panels are wired directly to the powerbank, I couldn’t test if they do produce 12W worth of power. Based on the brand (SunPower), size of the panels and my limited testing, I’d say that figure is most likely legitimate.
The panel will charge even in in-direct sunlight. But of course it will take longer.
When connecting devices to the USB ports, the power will first go to your device and any extra will then go into the powerbank.
The unit is water resistant so it can be left in the rain but should not be submerged under water. I would recommend leaving the back compartment zipped up if you suspect rain might come.
One downside of this unit from dodocool is that you cannot charge the powerbank using your standard wall charger, only by solar power. I’d like to have the option to also charge it like a standard powerbank if I want.
SUPPORT ME: If you enjoyed this video, please remember to give a LIKE and click here to subscribe to my channel – http://www.youtube.com/subscription_center?add_user=philstuffs
http://www.weldmaster.com/industries/packaging
The Miller Weldmaster Bag Closing System is a thermoplastic welding machine designed to build, weld and seal thermoplastic and paper bags closed with a pinch and/or double fold. The PS400 seam sealer can weld Polywoven and thermoplastics with no glue; paper bags use pre-applied hot melt. The PS400 can be integrated into an automatic filling line and/or manual feed systems.
