Wholesale Distributors for Mono-Crystalline 300W Solar Panel Wholesale to Mauritius
Short Description:
With our leading technology as well as our spirit of innovation,mutual cooperation, benefits and development, we will build a prosperous future together with your esteemed company for Wholesale Distributors for Mono-Crystalline 300W Solar Panel Wholesale to Mauritius, We warmly welcome merchants from home and abroad to call us and establish business relationship with us, and we will do our best to serve you.
Mono-Crystalline 300W Solar Panel
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.45V
Optimum Operating Current(Imp) 8.15A
Open Circuit Voltage(Voc) 45.60V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1950x990x50mm
Weight 22.1Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Mississippi Power, Silicon Ranch break ground on new solar energy facility $100-million facility to generate enough electricity to power thousands of homes
Mississippi Power and Silicon Ranch Corporation, along with local officials from the city of Hattiesburg, Forrest County and the Area Development Partnership, held a groundbreaking ceremony for the state’s largest solar farm today in Hattiesburg.
When operational, the $100-million facility will generate 50 MW, enough electricity to supply power to approximately 6,500 homes.
Members of the Mississippi Public Service Commission were also on hand for the ceremony, held at the Lake Terrace Convention Center in Hattiesburg.
There are a lot of 3D printers on the market but not many are like the Voxel8 we cover in this short video. 3D electronic devices get made via co-printing of thermoplastics and a highly conductive silver ink. The silver ink can be printed and cured at room temperature and is 5000x more conductive than conductive pastes and filaments currently used in additive manufacturing, says electrical engineering lead Kyle Dumont. The flow writing materials is controlled by an on-board pneumatic system. The 250 micron nozzle is translated to precise 3D locations within the build volume. The build plate is auto-leveled by measuring the Z distance at multiple locations.
