http://WWW.44ENERGY.COM
How to build a solar panel at home, full instruction
——————————————————————————————————————————–
More people are seeking to acquire houses in the distance from the centers of civilization. There are many reasons for this, chief among them, perhaps, environment. It’s no secret that the intensive development of industry bad for the environment. But when buying such a home may experience the lack of electricity, without which life in the twenty-first century can hardly be imagined.
The problem of providing energy building located far from the centers of civilization may try to solve the installation of wind turbine. However, this method is not ideal. In order to have enough power for the whole house will need to install a wind turbine or a few large, but in this case, the power supply will be of an episodic nature, being absent in calm weather. To ensure the stability of power supply at home, an effective solution is to share the wind generator and solar panels, but, unfortunately, the batteries are not cheap. The solution to these difficulties would be the production of solar cells with their hands, able to compete with the factory for power, but at the same time pleasantly different from them the price. And this is a Solution!
To start, you must decide what is a solar panel. At its core, it is the container, which contains the array, which convert solar energy into electrical elements. The word “array” is applicable in this case because to generate sufficient amounts of energy required by a power supply of a residential building, the solar cells will take quite an impressive number. In view of the high brittleness of the elements, their necessarily combine the battery, which provides them with protection from mechanical damage and combines produce energy. As can be seen, in principle, solar cell device is not anything really complicated, so it is quite possible to do by hand.
Before you can proceed directly to the actions taken to carry out a deep theoretical knowledge to avoid unnecessary difficulties and costs in the process. It is at this stage, many enthusiasts are faced with the first obstacle – the almost complete lack of useful from a practical point of view of information. This phenomenon creates a contrived appearance of solar cells: if they had not made himself, so it is difficult. However, employing logical thinking can come to the following conclusions:
basis of whether the process is to purchase a solar cell at an affordable price
purchase new items excluded due to their high cost and complexity of buying the required amount.
solar cells, which have defects and injuries can be purchased on eBay and elsewhere, at a much lower cost than new.
defective items may well be used in the given conditions.
Based on the findings, it is clear that the next step in the manufacture of solar cells is to buy the defective solar cells. In this case, the elements were purchased on eBay.
Acquired monocrystalline solar cells have a size of 3×6 inches, and each of them gave the order 0.5V power. Thus, connected in series are 36 items in total produce about 18V, which is sufficient for effective charging 12V battery. It should be remembered that such solar cells are fragile and brittle, so the chance to be damaged by rough handling extremely high.
To ensure protection against mechanical damage dealer covered with wax sets of eighteen pieces. On the one hand it is an effective measure to prevent damage during transport, on the other hand – the extra problems because waxing hardly anyone seems nice and easy. Therefore, if possible, purchase items that are not covered with wax, is the best solution. If we pay attention to the image light elements, you can see that they have soldered wires. Even in this case, will have to work a soldering iron, and if the same items purchased without guides – the work will be many times more.
Post time: Feb-08-2017