Ever wrestle a whole dimension photo voltaic panel up onto the roof of your residence?
I carried a couple up a ladder but determined that was not risk-free, either for me or the panel. I seemed into pre-manufactured roof hoist and found they value from $five hundred up to $2000 or more. Most ended up manufactured for heavier objects like shingles, but I only necessary something to raise a forty five pound photo voltaic panel,
I had some previous 2×4 lumber that I salvaged out of my previous patio enclosure. The boards ended up too small to reach the roof, but I joined two boards with each other for about a twelve foot length. Then I necessary some sort of wheel and keep track of program for the load platform to trip up and down on.
I imagined about some compact wheels rolling against the wooden, but it was a tiny too tough and warped for that. Then I found these nifty trolley wheels that healthy into normal uni-strut channel. So four trolley wheels and four lengths of six foot aluminum channel and I had the keep track of program mounted.
I bolted the trolley wheels onto a scrap of exterior plywood, additional base and back again supports and the cargo platform was carried out. Then I additional a rope pulley top rated and base along with a rope cleat around the base to tie off the rope. Stringing the rope from the top rated to base to top rated and down gave a 2 to 1 mechanical benefit and is about suitable for the weight of a panel.
The hoist is effective rather very well for what I necessary it for. It value beneath $two hundred but all the ordered objects can be re-made use of for other initiatives if necessary. I most likely could have made use of a pair of 10′ steel uni-strut sections with some cross bracing and that would have value about 50 % the price.
Hope you locate this intriguing. Thanks for looking at!
Post time: Feb-08-2017