Top Quality Poly-crystalline Solar Panel 250W Supply to Provence
Short Description:
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs for Top Quality Poly-crystalline Solar Panel 250W Supply to Provence, Contact with us today! We are ready for the market service now!
Poly-crystalline Solar Panel 250W
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.25V
Optimum Operating Current(Imp) 8.26A
Open Circuit Voltage(Voc) 36.61V
Short Circuit Current(Isc) 8.89A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.5KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
net metering not yet implemented in our city….so what is happening is it acts like LOAD SHARING as you can observe in syncing 2 generators……Our water pump is run by an off grid inverter of 600 watts…..
This is a demonstration of an improvement made to the pressure sensor/switch.
Official Page:
http://www.buildyourcnc.com/item/electronicsAndMotors-pneumatic-hydraulic-vacuum-pump-controller-sensor#prettyPhoto
Equipment that I use to make videos:
Canon EOS Rebel: http://amzn.to/2rJSeh0
Macro Lens: http://amzn.to/2qaSKmK
Microphone: http://amzn.to/2qO2RB4
3D Mouse to rotate/zoom/move the object (Must have for CAD!!!): http://amzn.to/2ruFnSn
The drafting pencil I use on these videos: http://amzn.to/2qioYg2
The cheap oscilloscope that I use (because it’s cheap and will work all of the projects in these tutorials): http://amzn.to/2rSHnBa
A better oscilloscope and the one I would recommend: http://amzn.to/2qizK5M
The brand of multimeter that I use and the one I recommend: http://amzn.to/2qicUez
Want to have your own Patreon campaign? https://patreon.com/invite/wpllxz
-~-~~-~~~-~~-~-
Please watch: “28. How to Interface an LCD to an ARM Microcontroller Tutorial – Part 15″
-~-~~-~~~-~~-~-
