Personlized Products Mono-Crystalline 10W Solar Panel Supply to Canberra
Short Description:
With a positive and progressive attitude to customer's interest, our company continuously improves our product quality to meet the needs of customers and further focuses on safety, reliability, environmental requirements, and innovation of
Personlized Products Mono-Crystalline 10W Solar Panel Supply to Canberra, We are looking forward to establishing cooperative relationships with you. Please contact us for more information.
Mono-Crystalline 10W Solar Panel
Technical parameter
Maximum Power(W) 10W
Optimum Power Voltage(Vmp) 17.56V
Optimum Operating Current(Imp) 0.58A
Open Circuit Voltage(Voc) 21.35V
Short Circuit Current(Isc) 0.64A
Mechanical Characteristics
Cell Type Mono-crystalline 52x35mm
No of Cell 36 (4x9pcs)
Dimensions 250x370x17mm
Weight 1.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 52*35mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Solar amps from 160w Solar Panel s PWM Charge Controller England UK.
A mid morning check on my Solar amps, looks like i am producing more solar amps than i need right now.
By dinner time the leisure battery was nearly fully charged.
I only have a small collection of solar panels, 160w in total.
Right now i use it to watch tv, and light the living room, using my 500w pure sign wave inverter.
Our stop at NAWS – Northern Arizona Wind & Sun and what we purchased.
The background music is “FREE” by Zac Brown Band.
We Purchased the following:
2 x SW 250 watt Mono Solar World panels. .
1 – Midnite Classic 150 Charge Controller
1 – Tiny Midnite Breaker (disconnect) Box
2 x 80 amp breakers DC
1 set of 2/0 5 foot long inverter cables and 250 amp fuse
1 – 50 foot long plug and play cable for the panels to charge controller
Got a few free caps and T-shirts.
Got to get the items back to the cabin so we can install them with the inverters and batteries we already have. Then we will have plenty of electricity to make living easier.
Hope you enjoy. Not one of my best video’s but felt we needed to get something posted.
NAWS page with links to their forum and online site. http://www.wind-sun.com/
-~-~~-~~~-~~-~-
Please watch: “The Right Equipment for the Homestead.”
-~-~~-~~~-~~-~-
