Online Exporter Mono-Crystalline 300W Solar Panel for Korea

Short Description:


Product Detail

Product Tags

Fast and good quotations, informed advisers to help you choose the correct product that suits all your needs, a short production time, responsible quality control and different services for paying and shipping affairs for Online Exporter Mono-Crystalline 300W Solar Panel for Korea, We are confident to make great achievements in the future. We are looking forward to becoming one of your most reliable suppliers.


Mono-Crystalline 300W Solar Panel

Technical parameter

Maximum Power(W)                         300W

Optimum Power Voltage(Vmp)         37.45V

Optimum Operating Current(Imp)     8.15A

Open Circuit Voltage(Voc)                45.60V

Short Circuit Current(Isc)                   8.91A

Mechanical Characteristics

Cell Type Monocrystalline                 156x156mm (6 inch)

No of Cell                                           72 (6x12pcs)

Dimensions                                        1950x990x50mm

Weight                                                22.1Kg

Front Glass                                        3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                       IP65 Rated

Output Cable                                      TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • I got a scrap 36 volt forklift battery that I plan to experiment with to see if I can put some of the cells into service for my off grid solar homestead.

    I have read that forklift batteries are the ultimate best in solar power use. The problem with them is their weight. This battery weighs 2,000 pounds and it is nearly impossible for a home owner to move something like this around. This is what keeps most off grid solar homes from using forklift batteries.

    Price per Amp hour and for the years of service life it seems that you cannot beat a forklift battery. These can last up to 20 years or more. Even tired, used batteries like this one can last up to 20 years in solar power use.

    I am hoping to get a couple banks of usable cells from this huge battery. I do expect to find a few dead cells. That is to be expected from an old battery. It was no longer holding enough of a charge to run the forklift so it was scrap to the warehouse owners.

    I first opened up all the caps and topped off the water levels with distilled water. Only use distilled water in a battery or you can damage the battery.

    Next I wanted to check the voltage of each cell but the lead was dirty and I had to get my cordless drill and a wire brush to clean off all the battery terminals.

    Next I checked all the battery cells for voltage. I found that most of the cells were not looking too bad. One was physically broken at the terminal and two more were flat out dead. This is exactly what I expected so I was not surprised at all.

    I chose the two 12 volt battery banks that I wanted to save and got out the reciprocating saw.

    Part II of my attempt to bring a forklift battery into service for my off grid solar tiny house on wheels is on the way.

    Follow my daily progress on the path to self sufficiency on my off grid solar homestead.

    https://www.youtube.com/user/techman2015/playlists?view=50&shelf_id=10&sort=dd

    Please donate to help keep The Off Grid Project ™ going: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3TQSWXLLRZ6HW

    Join The Off Grid Project ™ and The Do It Yourself World ™ forum and share your ideas, tips and projects.

    http://www.thediyworld.com/forum

    The Off Grid Project ™ is presented by The Do It Yourself World ™.

    http://www.TheDIYworld.com



    Cleaning A/C Drain Updated
    Disclaimer:
    This video is not meant to be a definitive how to.Always consult a professional repair manual before starting your repair.I am not responsible for any problems that you might incur by watching or following this video.

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Star

    WhatsApp Online Chat !