New Arrival China Poly-crystalline Solar Panel 100W to Saudi Arabia Factory

Our development depends on the advanced equipment ,excellent talents and continuously strengthened technology forces for New Arrival China Poly-crystalline Solar Panel 100W to Saudi Arabia Factory, If you have any comments about our company or products, please feel free to contact us, your coming mail will be highly appreciated.

Technical parameter

Maximum Power(W)                       100W

Optimum Power Voltage(Vmp)        17.87V

Optimum Operating Current(Imp)    5.60A

Open Circuit Voltage(Voc)               21.45V

Short Circuit Current(Isc)                 6.17A

Mechanical Characteristics

Cell Type Polycrystalline                  156x104mm (6 inch)

No of Cell                                36 (4x9pcs)

Dimensions                            1120x678x35mm

Weight                                    9.7KGS

Front Glass                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                      IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                   600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

Right now,we made the biggest 200watt foldable solar panel for our clients, though it’s a little heavy,but you may hard to move a 200watt glass solar panel, but LINKSOLAR 200watt solar panel,you can put it in your bag.and take it everywhere. 10kg Gross weight.

I set up solar a solar power system for my tiny house on wheels plus I have a helper working at the off grid homestead.

I have a pair of solar batteries that I got out of the scrap yard a couple years ago which I am now using for my tiny house for now. This is a temporary setup until I have time to build a proper insulated battery box for my RV golf cart batteries. Then I will move the golf cart batteries over to the tiny house and swap them out with the solar batteries.

I am using a harbor freight solar panel system for my tiny house for now. It is actually bringing in more power per day at only 45 watts than my entire 800 watt solar panel system for the RV. This is because the HF solar panels are amorphous and are producing power during cloudy and rainy days when the polycrystalline panels are not.

I am also using the HF solar charge controller for now. I plan to use a better solar charge controller soon though.

I cut a hole in the tiny house wall under the kitchen sink. I used a hole cutter to make the hole. This allows me to pass the wired into and out of the tiny house for the battery bank.

A set of wires enters the tiny house between the solar panels and the charge controller. Another set of wires is connected between the batteries and the charge controller. Yet another pair of wires comes from the batteries back into the tiny home. This is the main power line for the tiny house.

I have a helper who will be working on the souvenirs for The Off Grid Project since I have been too busy working on the house. Emre is a foreign student who is going go college locally. I am going to pay him per item made. He will be making The Off Grid Project coffee coasters and helping with various other souvenirs while I finish the tiny house.

I finished connecting the solar power system to my tiny home and started to connect some LED lighting to the house. I am using my homemade paneling to hold the LED spotlights above the kitchen counter.

A package arrived containing a tool belt and some saw blades. I do not know who sent it but thank you. This will help out a lot at the off grid homestead.

Follow my daily progress on the path to self sufficiency on my off grid solar homestead.

https://www.youtube.com/user/techman2015/playlists?view=50&shelf_id=10&sort=dd

Please donate to help keep The Off Grid Project going: https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=3TQSWXLLRZ6HW

Join The Off Grid Project and The Do It Yourself World forum and share your ideas, tips and projects.

http://www.thediyworld.com/forum

The Off Grid Project is presented by The Do It Yourself World.

http://www.TheDIYworld.com