Manufacturing Companies for Poly-crystalline Solar Panel 150W St. Petersburg Manufacturer
Short Description:
Our personnel are always in the spirit of "continuous improvement and excellence", and with the superior quality products, favorable price and good after-sales services, we try to win every customer's trust for Manufacturing Companies for Poly-crystalline Solar Panel 150W St. Petersburg Manufacturer, All the opinions and suggestions will be greatly appreciated! The good cooperation could improve both of us into better development!
Poly-crystalline Solar Panel 150W
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Poly-crystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1482x678x35mm
Weight 11.9KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Poly-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
OK, THIS IS SOMETHING I HAVE HAD ON MY MIND FOR A WILE BUT I JUST COULDN’T FIND A NIGHT LIGHT I COULD CONVERT.
I FOUND THIS AT DOLLAR TREE. ITS A FIBER OPTIC LIGHT THAT TAKES 3 AA BATTERIES. I OPENED THIS UP AND REMOVED THE LIGHTS AND ELECTRONICS. I THEN TOOK A SOLAR POWERED SIDEWALK LIGHT AND REMOVED THE LIGHT AND ELECTRONICS FROM IT AND INSTALLED IN THE PINK FIBER OPTIC LIGHT. I SOLDERED BATTERY LEADS TO ONE POST OF THE BATTERY COMPARTMENT BECAUSE YOU ONLY NEED ONE AA BATTERY FOR THIS LIGHT.
I WAS THINKING WHAT I COULD PUT TO SOLAR CELL IN SO IT WOULD LOOK GOOD HANGING ON THE WINDOW SO I JUST PUT IT BACK IN THE SIDEWALK LIGHT COVER. I THINK IT WILL LOOK GOOD AND YOU CAN PAINT IT OR GLUE COLORFUL CLOTH TO IT, MAYBE MAKE IT LOOK LIKE A HAPPY FACE SUN. WHATEVER YOU WANT. I’LL ATTACH IT TO THE WINDOW BY A SUCTION CUP.
I HAD SOME WIRE I GOT FROM AND OLD AC ADAPTER CHARGER I DIDN’T USE FOR ANYTHING AND SOLDERED IT TO THE LEADS ON THE CIRCUIT BOARD AND THEN SOLDERED THE OTHER END TO THE SOLAR CELL.
I PUT IT ALL BACK TOGETHER WITH A LITTLE HOT GLUE AND BAM! I HAVE A SOLAR POWERED NIGHT LIGHT I CAN PUT IN MY DAUGHTERS ROOM.
This is our Pre-wired Midnite solar Off grid power setup for a 24 volt battery bank. We have an Outback inverter charger 3500 watts with a Midnite solar MPPT charge controller classic 150 pre-mounted and wired onto a Midnite solar E-panel with breakers ,surge protection, bus bars, shunt, Battery bank breaker (250 amps), AC bypass switch and more. This is the way to go for your D.I.Y. project! I also show you how I have both chargers programmed with related links below. Shop around and you will find cheaper prices.
http://www.midnitesolar.com/classic/classicCP.php
http://www.midnitesolar.com/productPhoto.php?product_ID=256&productCatName=Charge%20Controllers%20-%20Classics&productCat_ID=21&sortOrder=1&act=p
http://www.midnitesolar.com/productPhoto.php?product_ID=57&productCatName=E-Panel%20-%20Outback&productCat_ID=1&sortOrder=6&act=p
http://www.outbackpower.com/outback-products/inverters-chargers/item/vented-vfx3524?category_id=447
