Leading Manufacturer for Poly-crystalline Solar Panel 100W for moldova Manufacturer

We keep improving and perfecting our products and service. At the same time, we work actively to do research and development for Leading Manufacturer for Poly-crystalline Solar Panel 100W for moldova Manufacturer, we are seeking for extensive cooperation with honest customers, achieving a new cause of glory with customers and strategic partners.

Technical parameter

Maximum Power(W)                       100W

Optimum Power Voltage(Vmp)        17.87V

Optimum Operating Current(Imp)    5.60A

Open Circuit Voltage(Voc)               21.45V

Short Circuit Current(Isc)                 6.17A

Mechanical Characteristics

Cell Type Polycrystalline                  156x104mm (6 inch)

No of Cell                                36 (4x9pcs)

Dimensions                            1120x678x35mm

Weight                                    9.7KGS

Front Glass                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                      IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                   600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

Here, I conneced a solar panel (via a transformer) to a sound interface as if it’s a microphone, to reveal the subtle pulsing and filckering of various light sources. If you don’t like 50 Hz, this video isn’t for you.

Thankfully, the infrared light from my camcorder is apparently very clean (not pulsing), so I can use that to see things in the dark without affecting the sound.

The transformer is just designed to convert 230V AC to 12V DC, so its audio properties are not very good (it muffles things a lot). Ideally, I’d be using an audio transformer that’s designed to sound good, but this is all I had available. I am using it to remove the DC current that the solar panel makes, because I don’t fancy putting 17.5V into my Quad-Capture (sound interface)’s mic input. I originally tried to make a high-pass filter to remove the DC, using a capacitor and resistor, but it only worked until the capacitor became fully-charged, at which point the sound faded. It was much clearer-sounding than the transformer, but there was also a huge amount of background noise.

I want to revisit this idea in the future, especially to take it for a drive at night, listening to the street lights and car lights (since modern cars use PWM to dim the tail lights).

Amazon.de: http://nset.us/sde/2/de/B01AA6UB84/facts
Sunkingdom 28w Photo voltaic Ladegerät um Geräte aufzuladen Genießen Sie einfaches Aufladen für Ihre Geräte, überall einsetzbar, mit unbegrenzter , sauber und freier Solarenergie.
Schnelle Powermax Iq Technologie Es lädt schneller zuverlässiger automatisch die Akkuleistung, das spezifische benötigt, um höchstmögliche in kürzester Zeit zu erreichen.
Wasserwitterungsfest Solarzelle gehärteter Plastikfläche aus Pet eingewebt in abnutzungsfestem Polyestertuch Wetterresistenz bei Outdoor Aktivitäten.
Wie zu verwenden,entfaltenpassen Winkel der sonner entgegenschließen dem Ausgangsanschluss Aspects: Output: 18v * 1555ma / 5.5v * 5090ma Hohe Effizienz: 18.5% Outoput Schnittstelle: Dc5521mm & Usb2. Was bekommen: 1x28w Folding Photo voltaic-panel 1xdc5521 männlich zu 10xdc Notebook-anschluss Handbuch 1xuser 12 Monate sorgenfreies Produktgarantie Warm Kundenservice Anmerkung: Bitte stellen sicher, dass Spannung Stromstärke des Eingangsstroms Ihres Geräts im akzeptierten Bereich liegen.
Legen in direktes Sonnenlicht, weil Bewölkung indirektes zu Fluktuationen im Ausgangsstrom führen können.