Hot Selling for Mono-Crystalline 180W Solar Panel Factory from Sao Paulo
Short Description:
Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Hot Selling for Mono-Crystalline 180W Solar Panel Factory from Sao Paulo, "Quality first, Price lowest, Service best" is the spirit of our company. We sincerely welcome you to visit our company and negotiate mutual business!
Mono-Crystalline 180W Solar Panel
Technical parameter
Maximum Power(W) 180W
Optimum Power Voltage(Vmp) 36.42V
Optimum Operating Current(Imp) 4.96A
Open Circuit Voltage(Voc) 44.45V
Short Circuit Current(Isc) 5.44A
Mechanical Characteristics
Cell Type Mono-crystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
3·7v Tip-31c
This is our Pre-wired Midnite solar Off grid power setup for a 24 volt battery bank. We have an Outback inverter charger 3500 watts with a Midnite solar MPPT charge controller classic 150 pre-mounted and wired onto a Midnite solar E-panel with breakers ,surge protection, bus bars, shunt, Battery bank breaker (250 amps), AC bypass switch and more. This is the way to go for your D.I.Y. project! I also show you how I have both chargers programmed with related links below. Shop around and you will find cheaper prices.
http://www.midnitesolar.com/classic/classicCP.php
http://www.midnitesolar.com/productPhoto.php?product_ID=256&productCatName=Charge%20Controllers%20-%20Classics&productCat_ID=21&sortOrder=1&act=p
http://www.midnitesolar.com/productPhoto.php?product_ID=57&productCatName=E-Panel%20-%20Outback&productCat_ID=1&sortOrder=6&act=p
http://www.outbackpower.com/outback-products/inverters-chargers/item/vented-vfx3524?category_id=447
