High quality factory Mono-Crystalline 30W Solar Panel to Macedonia Manufacturer
Short Description:
We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for High quality factory Mono-Crystalline 30W Solar Panel to Macedonia Manufacturer, Our tenet is 'Reasonable prices, efficient production time and best service .' We hope to cooperate with more customers for mutual development and benefits.
Mono-Crystalline 30W Solar Panel
Technical parameter
Maximum Power(W) 30W
Optimum Power Voltage(Vmp) 17.66V
Optimum Operating Current(Imp) 1.71A
Open Circuit Voltage(Voc) 21.39V
Short Circuit Current(Isc) 1.88A
Mechanical Characteristics
Cell Type Mono-crystalline 125×41.6mm
No of Cell 36 (4x9pcs)
Dimensions 449x554x25mm
Weight 2.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*41.6mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Solar Power Incubator Manufacturer India
How to use a solar powered chicken incubator Part 1 https://www.youtube.com/watch?v=nX7J6YE4MYg
How to use a solar powered chicken incubator Part 2 https://www.youtube.com/watch?v=H7BYeyK0FJo
How to use a solar powered chicken incubator Part 3 https://www.youtube.com/watch?v=SJa3Y8Z0jIw
Patented Limca record winner Solar Power Incubator with capacity for 40 eggs, 200 eggs and 500 eggs
http://lifewaysolar.com/prdt_pincubator.htm
Technical Specifications
Power – 24V/175 watt , DC System.
Vega Solar Photovoltaic Module – 24V/200 Wp – Exide battery – 12 V/1 00 Ah – 2 nos
Phocos Charge Controller – 24V/20 Amp – 16mm Core Copper Cable
In this video, I go over a little prep work required for my solar panel. I plan to make it approx 12V @ 3.5A. I’ll also build an identical one, but I’m not sure if ill have enough solar cells left over for the second panel yet.
Hopefully I have overcome the hardest part in building the panel, which is finding the box, or casing in which the cells sit in.
The item I am cutting is Plastic indoor/outdoor shelving which is white, hard, and heat resistant. It will not bend and it will provide ample protection for the cells as I plan on making this panel portable. The soldering iron I am using is a 100W/140W Weller model 8200 with a cutting tip.
This is the first of a series of installments on my DIY solar panel project. These panels will not be used for putting on top of a house, but to power small electronics and other small devices… the applications of which will be demonstrated in future videos.
The cells I am using are from MLSOLAR, and are .55V @ 3.65A a piece.
Filmed with a Cannon T3 under CFL low-med light.
