High Performance Poly-crystalline Solar Panel 250W to Belgium
Short Description:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
High Performance Poly-crystalline Solar Panel 250W to Belgium, We warmly welcome all perspective inquiries from home and abroad to cooperate with us, and look forward to your correspondence.
Poly-crystalline Solar Panel 250W
Technical parameter
Maximum Power(W) 250W
Optimum Power Voltage(Vmp) 30.25V
Optimum Operating Current(Imp) 8.26A
Open Circuit Voltage(Voc) 36.61V
Short Circuit Current(Isc) 8.89A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 60 (6x10pcs)
Dimensions 1640x990x40mm
Weight 18.5KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Visit our website for more information: http://www.seawardsolar.com/products/solar-power-clamp
An informative short film highlights how a highly versatile new AC/DC clamp meter can be used for effective power measurement and diagnostic testing on solar PV systems.
Available at (please insert Seaward Solar website link to film for news release version), the demo shows how the high performance Seaward Solar Power Clamp is used to measure DC and AC circuit power, in addition to true RMS voltage and current, harmonic distortion, power factor, resistance & continuity, diode check and capacitance.
The advanced new power meter has been specially designed for use by solar PV installers and technicians to measure the efficiency of PV systems, assess the performance of the inverter and carry out troubleshooting fault testing to ensure that system components are working properly.
For fast and simple power efficiency analysis, the Seaward Power Clamp simply clips over the cable to measure current from the inverter and the supplied in-line connectors can be used to measure the DC voltage whilst the PV modules are connected to the inverter, giving an accurate reading of the power whilst the system is operational.
The new Seaward Power Clamp also has full clamp on multimeter functions and is suitable for use on systems up to 600A AC or DC current and 1000V. The new unit is supplied with test leads and probes and comes in an all-inclusive test kit carrying case.
Link to our solar panels http://mwands.com/store/solar-products/solar-panels
MISSOURI WIND AND SOLAR WEBSITE
https://www.mwands.com
SOCIAL MEDIA:
FACEBOOK: https://www.facebook.com/MissouriWindandSolar/
INSTAGRAM: https://www.instagram.com/missouriwind/
PINTEREST: https://www.pinterest.com/missouriwind/
LINKEDIN: https://www.linkedin.com/company/missouri-wind-and-solar
YELP: https://www.yelp.com/biz/missouri-wind-and-solar-seymour-2
WHERE WE’RE LOCATED:
332 Cobblestone Drive
Seymour, Mo. 65746
HOW TO CONTACT US:
EMAIL: sales@mwands.com
PHONE: 1-417-708-5359
WHAT MAKES US DIFFERENT:
Missouri Wind and Solar offers a service no other DIY wind and solar company does – system design, installation advice, and detailed personal diagrams on how to wire the system together. You’re not blindly purchasing products you *think* you might need, you’re getting true customer and technical support before and after the sale.
