Factory wholesale Mono-Crystalline 300W Solar Panel Manufacturer in Chicago

Short Description:


Product Detail

Product Tags

Our well-equipped facilities and excellent quality control throughout all stages of production enables us to guarantee total customer satisfaction for Factory wholesale Mono-Crystalline 300W Solar Panel Manufacturer in Chicago, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.


Mono-Crystalline 300W Solar Panel

Technical parameter

Maximum Power(W)                         300W

Optimum Power Voltage(Vmp)         37.45V

Optimum Operating Current(Imp)     8.15A

Open Circuit Voltage(Voc)                45.60V

Short Circuit Current(Isc)                   8.91A

Mechanical Characteristics

Cell Type Monocrystalline                 156x156mm (6 inch)

No of Cell                                           72 (6x12pcs)

Dimensions                                        1950x990x50mm

Weight                                                22.1Kg

Front Glass                                        3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                       IP65 Rated

Output Cable                                      TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • In this video I show you how I added an off-grid solar system to an old RV. When this van was sold the only real use for solar panels was on a pocket calculator :P so its great to bring it in line with the times. (If only it was possible to update the mpg!)

    This kit I used included 2x 100w solar panels from Windynation. The cells are made by sunpower (a German company) and are freaking amazing. Also, we rip out a battery box, fix panels to the roof with velcro and connect it all up to a solar charge controller. I share the results after 7 weeks of use at the end of the video too.

    See my Van Conversion How-To Guide: https://goo.gl/0eAJJw

    Some notes:

    How to work out the size of your Charge Controller
    - Work out the size of Solar Charge Controller you need based on the wattage of your panels. If you plan for 300 Watts then divide that by the voltage of your system. In our case 12v. That gives 25 – which is the Amperage we need for the Charge Controller – ideally add 20 to 25% margin – so for 300Watts a 30Amp charge controller should be totally fine.

    Why get a Charge Controller that ‘fits’?
    - If you do not then it will not handle the extra charge when the batteries are full and you will over charge the batteries.. which will make them vent more and eventually damage/destroy them.

    Why does a bit of shadow ruin the solar panel‘s effectiveness?
    - To protect the cells from damage (creating sun spots where shadows are cast) will have a few diodes to prevent it. If a small shadow is cast it shuts of the area of panel that is covered by the diode – which could easily be 1/3rd (or more) of your panel.

    See my Van Conversion How-To Guide: https://goo.gl/0eAJJw

    Keep me creating with Patreon: https://goo.gl/LoDWRg

    Follow me on other places:
    Instagram – https://goo.gl/07uIGZ
    Facebook – https://goo.gl/rwE7Fi
    Twitter – https://goo.gl/g0O25a
    Snapchat – natemurphy1

    Van Conversion HOW-TO-GUIDE: https://goo.gl/0eAJJw

    Check out my clothing sponsor: 3rd Rock
    3rdRock make really nice and super ethical outdoor and lifestyle clothing.
    - Their website: https://goo.gl/c0m8UF
    - 15% OFF all clothes – discount with this code: VANWEAR

    They offer free worldwide shipping for free on orders over £100

    Clothes in this vid:
    T-shirt: https://goo.gl/iYbBZy
    Trousers: https://goo.gl/E7YRE9


    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the House

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    WhatsApp Online Chat !