factory wholesale good quality Mono-Crystalline 100W Solar Panel to Panama Factories
Short Description:
Sticking to the belief of "Creating products of high quality and making friends with people from all over the world", we always put the interest of customers in the first place for factory wholesale good quality Mono-Crystalline 100W Solar Panel to Panama Factories, We are sincere and open. We look forward to your visit and establishing trustworthy and long-term standing relationship.
Mono-Crystalline 100W Solar Panel
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 18.66V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 22.72V
Short Circuit Current(Isc) 5.92A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm(5 inch)
No of Cell 36 (4x9pcs)
Dimensions 1200x554x35mm
Weight 7.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
Full information: https://goo.gl/53MRGY
This is element 1 of my job in making a basic charge regulator for a compact sealed direct acid form battery. The lower out voltage will be all over 13.4 volt. The AGM batteries really don’t like overcharging and this regulator makes certain the latest is lower off when the voltage is reached. Principal components are the LM317T voltage regulator, a five K variable resistor to alter lower out voltage and a BC547 transistor. To allow for 650 ma charging latest, I am utilizing a 1 watt 1 ohm resistor. A lower resistance resistor will allow for a 1.three amp gradual charge for batteries up to fifty amps. Your charging electricity supply can be a electricity transformer with output latest of 500ma to 650ma and 18 v open voltage. I will likely be utilizing a five to ten watt twelve volt photo voltaic panel.
Click on right here for Aspect two http://youtu.be/Sxmc8dzgHVU
Click on right here to subscribe to this channel: http://www.youtube.com/membership_center?increase_user=wtam69
