Factory Promotional Mono-Crystalline 100W Solar Panel Factory in Dominican Republic
Short Description:
The customer satisfaction is our primary target. We uphold a consistent level of professionalism, quality, credibility and service for
Factory Promotional Mono-Crystalline 100W Solar Panel Factory in Dominican Republic, For further information, please do not hesitate to contact us. All inquiries from you will be highly appreciated.
Mono-Crystalline 100W Solar Panel
Technical parameter
Maximum Power(W) 100W
Optimum Power Voltage(Vmp) 18.66V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 22.72V
Short Circuit Current(Isc) 5.92A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm(5 inch)
No of Cell 36 (4x9pcs)
Dimensions 1200x554x35mm
Weight 7.8Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
For More videos subscribe my channel
https://www.youtube.com/channel/UCuhA6PQax62fXL5WuYmt-fw
Difference Between Inverter Vs hybrid Inverter Link
Best Battery For Solar System link
solar charge controller installation Hindi/Urdu
Solar Controller part 2
Choosing an honest and reliable solar power contractor is very important when going off-grid. There is a lot involved in doing solar correctly. The utility company has to be contacted, inspectors need to be scheduled, permits need to be acquired, “call before you dig” has to be called, heavy equipment may need to be rented, seemingly endless trips to Home Depot are made, the right solar equipment needs to be purchased, etc. By hiring a reputable solar contractor all of that work is done for you. And you won’t stay up at night wondering if you got any wires crossed during the install.
RESOURCES:
- Trever Gerdes at Big Dog Solar: 208-569-8777 (mobile), 208-242-3352 (office)
- Going Off-Grid Step-byStep Playlist: https://www.youtube.com/watch?v=uc5-E0ABPcA&list=PL2cLVMJiux-mdS2jN_oIi_OFockQ1-Smi
