Factory directly sale Mono-Crystalline 150W Solar Panel Factory from Guinea

Short Description:


Product Detail

Product Tags

Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for Factory directly sale Mono-Crystalline 150W Solar Panel Factory from Guinea, Our company maintains safe business mixed by truth and honesty to keep long-term relationships with our customers.


Mono-Crystalline 150W Solar Panel

Technical parameter

Maximum Power(W)                            150W

Optimum Power Voltage(Vmp)            17.92V

Optimum Operating Current(Imp)        7.83A

Open Circuit Voltage(Voc)                   21.86V

Short Circuit Current(Isc)                     8.59A

Mechanical Characteristics

Cell Type Monocrystalline                 156x156mm (6 inch)

No of Cell                                            36 (4x9pcs)

Dimensions                                       1485x668x35mm

Weight                                                 11.6KGS

Front Glass                                        3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                       IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                 -40°C ~ + 85°C

Maximum System Voltage:                    600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 156*156mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Polycrystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • www.solarworld-usa.com

    Building on expertise gained over four decades, SolarWorld leads the solar industry in developing clean, reliable solar power solutions that consistently exceed the expectations of customers and partners.

    With a long history of successful solar power development projects and satisfied customers worldwide, the SolarWorld Projects & Solutions team is ideally equipped to turn your clean energy vision into a reality.

    From small-scale solar projects that power a single building to large-scale solutions that deliver energy to a community, we have the experience and background to develop durable, proven solutions that operate dependably—even in harsh and demanding environments.



    http://www.overunity.com/13282/carbonfiber-alufoil-selfmade-diy-battery-with-naco3-or-ashwater-electrolyte

    Hi Guys,
    finally I wanted to show you now my new DIY selfmade battery technology.
    This is very easy to make and puts out quite an amount of small MilliWatts of power.

    Not just yet to light up an 1.2 Volts 0.22 Amps incandescent bulb, but at least it blinks it.

    With a well built Joule Thief circuit this should be able to really power up many LEDs very brightly.
    This will be the next thing I will try.

    So how is this battery be made the cheapest way ?

    You just need Aluminiumfoil from the supermarket,
    a carbonfiber sheet ( This is the only thing you probably have to order,
    as the other parts you will get very easily) and some ashes from a fireplace.
    (woodashes or coalashes) or instead of the woodashes you can also get Sodium Carbonate, that is also called Washing Soda. This is also available is every bigger supermarket. You could also use Sodimpercarbonate from spot removal wshing solution powders , but this is more aggressive and more expensive, so stick with ashes ( it is free) or
    buy some washing Soda.

    So then you take about 3 to 4 teaspons of Washing soda or ashes and put it in about 100 MilliLiters of tap water ( about 1/2 drinking glas full of water).
    Then you use this solution after stirring to put it onto a paper towel and put this wet paper towel between the alufoil and the carbonfiber sheet.

    Then you have just about 1.4 Volts open circuit voltage and more than 100 milliamps of short circuit current. (from a size of around DinA4 sized sheets, so around 20 x 30 cm).

    Now you can stack several cells in series to be able to directly light some LEDs or just use a Joule Thief circuit on ONE cell to light up a few LEDs.
    I will soon build my own powerful Joule Thief circuit and will show this also then.

    So stay tuned to my channel and please subscribe, rate and comment and share it with your friends.
    This is a great battery cell for emergency usage as the only thing that decomposes is the Alufoil ! The carbonfibersheet can be washed off with water and always be reused !

    This is the way to go to build selfmade cheap batteries to power LEDs.

    Hope you enjoyed it.

    Regards, Stefan.Link to this video:

    -~-~~-~~~-~~-~-
    Please watch: “Free Energy Machine ? Scam ? from Witts.ws – QEG ? Scam ? inspired model ?”
    ➨ https://www.youtube.com/watch?v=Y1BInIh_mRQ
    -~-~~-~~~-~~-~- Please watch: “OPV Solar Cell – DTU Organic Solarcell – Free Plastic Organic Solar Cells – first test”
    ➨ https://www.youtube.com/watch?v=EuhDTaLBGq0 Future Tech:: “FREE ENERGY DEVICE – AKULA Blue LED Light Generator”
    ➨ https://www.youtube.com/watch?v=6cSXYeGsO9o Akula FREE ENERGY DEVICE – Akula Lantern Circuit number 4
    ➨ https://www.youtube.com/watch?v=DnuXqnTlJNM ———————————–
    Please watch: “Hydrogen compressed H2 and O2 gas separator split cell by Stefan Hartmann”
    ➨ https://www.youtube.com/watch?v=AikUjB2WXgs Please watch: “Orbo Webinar 2 – Steorn Orbo Ophone OCube and Powercell presentations”
    ➨ https://www.youtube.com/watch?v=hp_pbV9-Yvo —————
    Shop Amazon – Contract Cell Phones & Service Plans

    http://bit.ly/smartphone-offers

    —————————————————
    Try Audible and Get Two Free Audiobooks:

    http://bit.ly/audible-2free-audiobooks

    ————————————————————
    Join Amazon Prime Music. 30-day Free Trial !
    http://bit.ly/amazon-prime-music-offer ================================================

    Now here is a great new Outro Video Maker, what I also use now, how you can very
    easily produce your Outro-Videos for your Youtube Videos, so that they will have these Thumbnail
    Outro Videos to click on, so people stay on your channel. The Outromaker does also add automatically Annotations and Cards!
    Highly recommended. also very good for getting new susbscribers !

    http://bit.ly/outromaker

    ============================= Please support me on Patreon:

    https://www.patreon.com/overunitydotcom

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Flag

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Heart

    WhatsApp Online Chat !