Factory directly provide Mono-Crystalline 150W Solar Panel Supply to Malaysia
Short Description:
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for Factory directly provide Mono-Crystalline 150W Solar Panel Supply to Malaysia, We sincerely welcome both foreign and domestic business partners, and hope to work with you in the near future!
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
100W Sunpower Foldable Solar Panel（18v Output ） Portable Solar Charger For outdoors ,hunting,hiking ,camping, Fishing, RV,Boat
Thanks for watching!
I made the solar panel this afternoon by soldering six 60mA 10v solar cells together in parallel, and sealing them between two pieces of acrylic glass with an air tight seal. The cable is extremely long. In the video, I am supervising the charge of the 2.7v cap. However, if I left it in the current configuration, and took off somewhere, the charge on the cap would eventually exceed 2.7v and destroy the cap. When I implement this, I will have a voltage limiter circuit, and a super capacitor bank.
Check us out at:
http://www.engineeringshock.com/
http://www.paintballprops.com/
http://electroniclessons.com/
