Europe style for Mono-Crystalline 200W Solar Panel Toronto Factory
Short Description:
We always continually provide you with the most conscientious customer service, and the widest variety of designs and styles with finest materials. These efforts include the availability of customized designs with speed and dispatch for Europe style for Mono-Crystalline 200W Solar Panel Toronto Factory, We welcome you to visit our factory and look forward to establishing friendly business relationships with customers at home and abroad in the near future.
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
การนำ Charge controller Solar Cell มาใช้กับปั้มชัก 1นิ้ว มอเตอร์ dc 12v 300 w เพือ่ให้ทำงานอัตโนมัติในเวลากลางคืน โดยต้องใช้สายไฟเส้นใหญ่ในการต่อเข้า Charge controller และตั้งโหลด ออฟ ให้ต่ำไว้ก่อน เพราะมอเตอร์จะกระชากไฟในการเปิดการทำงานครั้งแรก และจะหยุดการทำงานตาม v ที่ได้ตั้งค่าไว้ การใช้งานมาหลายเดือนอุปกรณ์สามารถใช้งานได้ดี แบตขนาด 75 a 2ลูก สามารถใช้งานได้นาน 6-7 ชม.
Charge controller Solar Cell for use with a 1-inch induction pump motor dc 12v 300 w for automatic operation at night. By using a large wires to connect to the Charge controller and set the load to low. Because the motor will snatch the light on the first turn. And will stop working as set up. The device can work for many months, the battery size 75 a 2 balls can be used for 6-7 hours.
Product Link: http://www.everbuying.net/product971122.html?lkid=92145&utm_source=youtube_130359001&utm_medium=sns&utm_campaign=lingpeng
Main Features:
1.High efficency SUNPOWER monocrystalline solar panel,solar conversion effeciency up to 25%.Most panels in the markets are normally 15% or even lower
2.Dual USB port,20w/3.4A output provides enough power to charge two devices at a time
3.Built-in intelligent chip, equipment’s current can be automatically identified and achieve quick charging.
4.Suaoki solar panel charger is 1/3 lighter than the same power of monocrystalline solar panel, which is easy to carry for camping,hiking,and other outdoor activities.
5.Equipped with four hooks, easy attachment to backpacks or other places
