Discount wholesale Mono-Crystalline 60W Solar Panel for Iran Importers

Short Description:


Product Detail

Product Tags

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of Discount wholesale Mono-Crystalline 60W Solar Panel for Iran Importers, We are sincerely welcome good friends from numerous circles at dwelling and abroad come to cooperate!


Mono-Crystalline 60W Solar Panel

Technical parameter

Maximum Power(W)                         60W

Optimum Power Voltage(Vmp)        18.46V

Optimum Operating Current(Imp)    3.25A

Open Circuit Voltage(Voc)               22.51V

Short Circuit Current(Isc)                 3.57A

Mechanical Characteristics

Cell Type Mono-crystalline                  125 x 83mm

No of Cell                                           36 (4x9pcs)

Dimensions                                         821x554x35mm

Weight                                                 5.0Kg

Front Glass                                          3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                         IP65 Rated

Output Cable                                       TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*83mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • Welcome, today I will guide you to make a mini submarine from the bottle, the hand and the remote control circuit is very simple.
    - To do this mini submarine DC we will need
    - 1 set hand and a remote control circuit, 1 battery
    - 1 the motor to make engines for submarines
    - 1 bottle of lemon salt 360 to hull
    - 1 oil bottle 4L best to cut out the neck with bottle
    - 1 piece of plastic to make propeller
    - 1 jar of black paint …………………………..
    Come and watch the video now and perform then, to wish you success



    WEBSITE: http://www.swimmingpoollearning.com/

    YouTube Video Index — A list of all of my videos: http://poolmandave.blogspot.com/2014/03/swimming-pool-tips-reviews-how-to-video.html

    I already had re-plumbed the pump inlet last week so this is how you do the pump discharge line that sits above the pump. You would plumb both the same way.
    TO SEE THE NEW VERSION OF THIS REPAIR WITH HIGH HEAT NIPPLE PIPE:
    Repairing A Pump Discharge Leak Updated & Revised Version: http://youtu.be/o5V6P0IQpM4

    RELATED VIDEOS:
    How to Fix Leaking Swimming Pool PVC Pipes: http://youtu.be/07cvZyxJiEU
    For Part 1 of Pool Pump not Working see: http://youtu.be/_k-BLL98bFU
    For part 2 which covers manually priming your pump: http://youtu.be/oshWO3zq17o
    Clogged Impeller, pool pump not priming: http://youtu.be/tdhkddQKb6M
    Skimmer Weir stuck, pump not priming: http://youtu.be/iKWJIFcK4MA
    Pool Skimmer Weir replacement & Install: http://youtu.be/DTDWA-la33w
    Pool motor tips, motor burning out: http://youtu.be/IdpoNzrBV8M
    Pool Water Level, proper water level: http://youtu.be/6dXIY0YN7bE
    Replacing a Pool Pump Housing Gasket: http://youtu.be/r0ReyYVpVM8
    Filter Saver, skimmer inserts: http://youtu.be/p0l-pNoO_eM
    Variable Speed Pumps, Dual Speed Pumps, a quick overview: http://youtu.be/YgOq1X65Kvg

    NOTES:
    This is not a very difficult job, but it does require accurate measurements for the pipes to fit together. The last pipe fitting you do will be the most difficult as that will be the one that will make a complete sealed plumbing. Please plan accordingly so you will be able to fit it on. In this video I was able to move the pump back about 1 inch and slide the last pipe on, then I pushed the pump back completing the plumbing seal. It takes some practice but you can do it. If you make a mistake, simply cut out the pipe or use a new pipe and new fittings. The pipe fittings are not very expensive. All the material for this job will cost you about $20 -$25. Just by extra fittings in case you make an error in your cutting or measuring.

    Parts list:
    2″ MALE ADAPTER THREADED FITTING (for top of pump)
    For a better heat rating you can use this pipe also:
    2″ x 12″ nipple cpvc pipe (grey) and rated to 140 degrees
    2″ SLIP COUPLING
    2″ PVC PIPE 5 FT
    2″ SLIP 90 DEGREE ELBOWS
    2″ FITTING EXTENDER
    POOL-TITE GLUE .5PT
    Plasto-Joint Stick Thread Sealant 1.25oz 11775 for threaded fitting on top of pump
    You can also use plumbers tape

    Of course if your pool has 1 ½” pipes adjust the fitting size accordingly.

    Pool-Tite Glue Instructions:
    Shake can well. Use a primer to clean the pipe fittings (priming step is not needed for non-pressure pipes less than 4″ in diameter. Apply liberal coat of cement to pipe depth of the socket, leave no uncoated surface. Apply a thin coat inside if the fitting, avoid puddling, Apply a second coat to the pipe. Assemble parts Quickly. Cement must be fluid. If cement surface has dried recoat both parts. Push pipe firmly into fitting giving it a ¼ turning motion. Hold pipe and fitting together for 30 seconds to avoid it popping out. Glue can get old so if it is gel like don’t use it.

    You can use the Purple primer or the clear one to prep the pipes. The Purple primer has a very strong dye in it so if you drip it won’t come off, so the clear one is less messy.

    Sometimes the pump itself will have warped a bit from the heat. In that case the 2″ x 12″ nipple cpvc pipe will sometimes seal it better.

    Here is a look at the pipe online -

    http://www.grainger.com/Grainger/GF-PIPING-SYSTEMS-Pipe-Nipple-6MW40

    You will just have to cut it down to size and then do the repair accordingly.

    Mrdgvb1 Social Media Links:
    WEBSITE: http://www.swimmingpoollearning.com/
    Google +: https://plus.google.com/b/107735343574734346096/
    Blogger: http://poolmandave.blogspot.com/
    Facebook: https://www.facebook.com/pages/Youtube-Mrdgvb1/381257741926763?ref=hl

    If you found this video helpful, please visit my website, any donation is greatly appreciated.
    WEBSITE: http://www.swimmingpoollearning.com/

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Key

    WhatsApp Online Chat !