China supplier OEM Mono-Crystalline 300W Solar Panel Ottawa
Short Description:
We have advanced equipment. Our products are exported to the USA, the UK and so on, enjoying a good reputation among customers for China supplier OEM Mono-Crystalline 300W Solar Panel Ottawa, As we are moving forward, we keep an eye on our ever-expanding product range and make improvement to our services.
Mono-Crystalline 300W Solar Panel
Technical parameter
Maximum Power(W) 300W
Optimum Power Voltage(Vmp) 37.45V
Optimum Operating Current(Imp) 8.15A
Open Circuit Voltage(Voc) 45.60V
Short Circuit Current(Isc) 8.91A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 72 (6x12pcs)
Dimensions 1950x990x50mm
Weight 22.1Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
In this video I will show you have to power LED lights by using solar panels as the power source. Here’s all the components used in the video:
LED lights: http://www.ebay.com/itm/5M-12V-3528-LED-Strip-Lights-5050-Flexible-LED-Lights-Strip-5630-LED-Strip-Lamp-/201092227136?var=&hash=item2ed207e040:m:mv_CvEPIJ-bdGA0HvhKP_Ug
Solar panels: http://www.ebay.com/itm/301966354364?_trksid=p2060353.m2749.l2649&var=600765252666&ssPageName=STRK%3AMEBIDX%3AIT
Switch: http://www.ebay.com/itm/301953835161?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT
Wires: http://www.ebay.com/itm/New-UL1007-Stranded-Equipment-Wire-18AWG-30AWG-Cable-Cord-Hook-up-DIY-Electrical-/371024077766?var=&hash=item5662c223c6:m:mVIevdd03wbXRGkZxVKZwHg
Foam: http://www.ebay.com/itm/3-5-10mm-ESD-Anti-static-High-Density-Foam-200mm-X-200mm-PMD-/162036101818?var=&hash=item25ba1ab2ba:m:m1wlZl-736pjjuNVCaASEGA
This is a a very inexpensive project that gives beautiful results. Begin with combining the solar panels in a way to receive a 12V source with a 300mA minimum. Attach the solar panels to a sheet of foam and solder cables equal to the length of the distance between your solar panels and your LED lights. Position the solar panels on the highest point around you (obviously outside). Solder your solar panel cable to the switch and then your LED lights.
Even though your LED lights will be powered during the day I highly recommend buying a total of 8 solar panels. This will ensure you always have 12 volts going to your LED lights. In case you only purchase 4 solar panels it’s crucial to find the location with the longest sunshine hours.
Subscribe to my channel here: http://www.youtube.com/user/rclifeonsimon?sub_confirmation=1
Music:
Melange – Anvion
Mike Chino – Calm and Harmony
Used cameras:
Sony Alpha a55
DJI Phantom 3 Advanced
GoPro Hero 2
Video Editing Programs:
LightWorks
