China Gold Supplier for Poly-crystalline Solar Panel 200W to Japan Factory
Short Description:
Our company has been focusing on brand strategy. Customers' satisfaction is our best advertising. We also supply OEM service for China Gold Supplier for Poly-crystalline Solar Panel 200W to Japan Factory, "Passion, Honesty, Sound service, Keen cooperation and Development" are our goals. We are here expecting friends all over the world!
Poly-crystalline Solar Panel 200W
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 26.78V
Optimum Operating Current(Imp) 7.47A
Open Circuit Voltage(Voc) 32.66V
Short Circuit Current(Isc) 8.21A
Mechanical Characteristics
Cell Type Polycrystalline 156x156mm (6 inch)
No of Cell 54 (6x9pcs)
Dimensions 1482x990x40mm
Weight 17.6Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
The BATTERY EXTRA EX02 12-120-800 is unique in the fact it will work with all battery voltages from 12 to 120 volts and capacities. Up to 3,000 Ah
It is always best to test your batteries before using the BATTERY EXTRA. This will confirm if a battery can be saved or improved. Even New batteries can suffer from being sulphated if they were badly stored before you bought them.
Always be aware that when handling batteries you should wear goggles and gloves.
First do a visible inspection. Replace any battery that has a cracked or broken case.
Clean or replace any dirty damaged or rusty connections. On wet batteries check the water level, make sure the water just cover the plates, do not overfill the batteries.
Fill only with distilled water. Be aware that the battery solution is corrosive.
Please follow me on these channels ( jwsolarusa ) on:
Google+
https://plus.google.com/collection/kwKoHB
OFF-GRID SOLAR SYSTEM: https://www.youtube.com/playlist?list=PLSNjIRSnUPDLovhitt8VWciXC6wWbOHbX&jct=HmigL8AwIRJT7DPKKeYFPEeKXN_16Q
YouTube channel:
http://www.youtube.com/channel/UCm8Raa6JdTXTNmjnF5OTcnA
Facebook Page
http://m.me/1806732252931962
https://www.facebook.com/jwsolarusaMN-561208810741192/about/
Twitter:
@jwsolarusa
Instagram:
@jwsolarusa
Tumblr:
+jwsolarusa
Full information: https://goo.gl/60p2sa
