Cheapest Price Mono-Crystalline 50W Solar Panel Wholesale to Armenia

With advanced technologies and facilities, strict quality control, reasonable price, superior service and close co-operation with customers, we are devoted to providing the best value for our customers for Cheapest Price Mono-Crystalline 50W Solar Panel Wholesale to Armenia, Welcome friends from all over the world come to visit, guide and negotiate.

Technical parameter

Maximum Power(W)                        50W

Optimum Power Voltage(Vmp)        18.72V

Optimum Operating Current(Imp)    2.67A

Open Circuit Voltage(Voc)               22.83V

Short Circuit Current(Isc)                 2.94A

Mechanical Characteristics

Cell Type Monocrystalline              125×62.5mm

No of Cell                                        36 (4x9pcs)

Dimensions                                     636x554x25mm

Weight                                            4.2Kg

Front Glass                                     3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

For more information please check this out http://bit.ly/SolarPowersetup2 . So you bought a 150 watt solar kit to charge to your battery thinking that it will deliver 1000 watts. Well, I’m sorry to need to tell you it will probably only produce about 700 watts of usable power. Had you been conned? No, you just need to understand 3 important facts about solar panels.

There are diverse sorts of solar panels. The Crystalline panels are much more durable and last up to ten years. Thin film panels lack durability, but are incredibly flexible. They work better in low-light conditions, so you might want to have at least 1 thin film panel throughout winter months. If you decide on the correct DIY guide, you’ll discover how to make the finest of your tools so that you can create sturdy, reliable domestic solar panels.

The more the power generation capacity of the panel the more will be the price of it. The price can also fluctuate because of the cells that are used to manufacture the solar panels. This is quite important to check out which type of solar panel is going to suit your location and the space that you can provide to the system.

Factors that affect the amount of energy produced in the panels include weather conditions, shade, and the angle at which the system is installed. Thus, you need to remove any obstacles that might cast shade. If you can’t remove them, place the solar panels above them. Some homeowners buy or build mounts for their domestic solar panels. You’ll learn about these in your building guide.

After you’re done, grab another piece and turn both cells around exposing the positive sides. With the already tabbed unit, get the extended tabbing wire and solder it onto the new cell’s positive bus bars. After they are soldered on, they should connect together without falling apart. Next, you will need to build 4 arrays of 9 PV cells. Once you’re done with building each array, you connect them together with the bus wire at each end of the array. There will be three parts at which each array will break; you will need to solder the bus wire to those areas.

Take our total load (1.36 KWA) and divide it by sunlight hours (5) = (0.272) This is the figure in KW that are panel will need to provide for 5 hours to enable us to place enough power in our battery bank to let us use our electrical equipment for designated time above (2 Hours per day) 0.272 KWA can be converted into Watts by x 1000 so: 0.272 KWA x 1000 = 272 Watts or a 272 150 watt solar panel Is required!

The good news is that the analysis to determine whether the cost of installing solar panels is fairly simple. The 3 factors below are the only things you need to initially consider to calculate how long it will take for solar power on your home to become a cost-saving solution.

Our government is not doing a lot about bringing the cost of energy down because energy is heavily taxed and provides revenue for the country. I feel my income taxes provide enough of that so I’ll try anything to save money any way I can.