9 Years Factory Poly-crystalline Solar Panel 40W to Cancun Factories

Short Description:


Product Detail

Product Tags

We always believe that one's character decides products' quality, the details decides products' quality ,with the REALISTIC,EFFICIENT AND INNOVATIVE team spirit for 9 Years Factory Poly-crystalline Solar Panel 40W to Cancun Factories, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.


Poly-crystalline Solar Panel 40W

Technical parameter

Maximum Power(W)                        40W

Optimum Power Voltage(Vmp)        17.35V

Optimum Operating Current(Imp)    2.31A

Open Circuit Voltage(Voc)               21.16V

Short Circuit Current(Isc)                 2.53A

Mechanical Characteristics

Cell Type Polycrystalline                156 x 52mm

No of Cell                                     36 (4x9pcs)

Dimensions                                 670x420x30mm

Weight                                        4.0Kg

Front Glass                                 3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

 Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

  • Previous:
  • Next:



  • www.twitch.tv/xiflynnx

    As always thanks for clicking on the video.

    Don’t forget to leave a rating comment and subscribe if you enjoyed
    as it helps the channel out immensely!

    ►Social Media
    ►Twitter : https://twitter.com/xiFlynn
    ►Facebook : https://www.facebook.com/xiFlynn?ref=hl
    ►Twitch : http://www.twitch.tv/xiflynnx
    ►Donate : https://www.youtube.com/redirect?q=https%3A%2F%2Fwww.paypal.com%2Fcgi-bin%2Fwebscr%3Fcmd%3D_s-xclick%26hosted_button_id%3DAZZUXB6FQ6A9A&redir_token=955ktkRSKsC6pILPvcBGluSvhal8MTQzOTA3NTk3NkAxNDM4OTg5NTc2
    ►Play Warframe Now! ( 7 day XP Booster ) : https://warframe.com/signup?referrerId=55c24db338463299409d2cfd

    ►About Warframe

    About Warframe:
    Warframe is a cooperative free-to-play online action game set in an evolving sci-fi world. Join your friends in player-vs-enemy raids across the solar system and master the power of the Warframes. Stand alone or fight together against enemies that threaten your world.

    They were called Tenno. Warriors of blade and gun: masters of the Warframe armor. Those that survived the old war were left drifting among the ruins. Now they are needed once more.

    The Grineer, with their vast armies, are spreading throughout the solar system. A call echoes across the stars summoning the Tenno to an ancient place. They summon you.

    Allow the Lotus to guide you. She has rescued you from your cryostasis chamber and given you a chance to survive. The Grineer will find you; you must be prepared. The Lotus will teach you the ways of the Warframes and the secrets to unlocking their powers.

    Come Tenno, you must join the war.



    http://toolboom.com/en/Energy-Saving/LED-DIY-Kits
    You don’t need any special skills to assemble a LED lamp.
    Five minutes of free time, a few tools and some desire to make something by yourself – that’s all you need to build a modern, beautiful and efficient light source.
    By assembling LED lamp with your own hands you can always be 100% sure that it will meet the claimed specifications, since most of the commercially available LED lamps have overstated specifications. The number one reason you want to build the LED lamp by yourself is that you’ll save a substantial amount of money. LED DIY kits is 1.5-2 times cheaper than already assembled lamps.

    Let’s briefly remind ourselves about the benefits LED lamps:
    First of all – it’s the energy saving factor. LED lamps consume 10 times (video text – Save up to 10 times) less power compared to incandescent ones and 2 times (video text – Save up to 2 times) less power as compared to fluorescent lamps.

    The lifespan of the correctly assembled LED lamp is 50 thousand hours (video text – 50 thousand hours) or more, with an 8-hour operation time per day. 15 years of trouble-free operation (video text – 15 years of trouble-free operation).
    Among other benefits:
    instant start
    operation in wide voltage range – from 85 to 265 Volts
    no flicker
    no infrared and ultraviolet radiation
    an ability to choose the color temperature: warm or cold

    To assemble the LED lamp we’ll need:
    aluminum lamp housing (which consists of lamp base, PCB for LEDs, light diffuser and mounting elements)
    LED current driver
    light-emitting diodes (their number determines the power of the lamp)

    The tools we use:
    soldering iron
    multimeter
    screwdriver
    and some consumables: thermal paste, solder and hot glue.

    Try and assemble by yourself this very promising and cost-effective light source.
    First of all we need to determine the polarity of the LED – some manufacturers apply plus and minus signs to the contacts of the LED, but some LEDs can be supplied without the polarity indication. We are using a tester to do this job. If you connect the plus test lead to the positive contact of the LED, and a minus to negative contact – LED should light up. PCB for LEDs has a corresponding plus and minus designation.
    For mounting the diodes we use thermal paste that provides effective heat dissipation between the contact area and the board.
    Mount all of the LEDs with the correct polarity.
    Solder the LEDs to the board and be careful not to damage the LED lenses with the soldering iron.
    Using a tester we check the quality and accuracy of the soldering. Test leads should be placed on the nearby LEDs with the correct polarity. As the result LED should light up.
    Connect driver to the lamp base. One of the white wires should go through the center of the base and must be fixed using the screw with a flat cap. The other wire should be fixed during the lamp base assembly.
    Using a tester check the contact between the base and the driver.
    Put the driver into the mount in the base and fix it with hot glue and wait until it cools down.
    Screw the base into the lamp housing.
    Solder the driver to the PCB maintaining correct polarity which is indicated on the board – pink wire to positive, white wire to negative.
    Apply the thermal paste at the point of contact of PCB and lamp housing.
    Adjust the holes on the lamp and on the board. Screw the board to the housing.
    It is important to fix the lamp base to the housing using a sharp tool – screwdriver or an awl. Push the metal on the base in three or four points to do this.
    Finally screw on the light diffuser to the lamp housing.
    Check for a short-circuit on the housing and between the contacts of the base.
    The lamp is ready now.
    Using wattmeter we measure lamp power – 7.6 W.
    Using light meter measure illumination at a distance of 1 meter – 300 lux.
    Measure the temperature in the LEDs area after 5 minutes of operation – 42 degrees Celsius.
    Measure the temperature of the lamp housing – the temperature is 40 degrees Celsius.
    We have assembled LED lamp with the following parameters:
    ~ 140-160 degrees beam angle
    housing heating is 40 degrees Celsius
    ~ 7 watt power consumption
    and 670~700 lumens of luminous flux
    We hope that our video instruction will help you to:
    significantly reduce the cost of electricity
    choose high-quality LED lamp components and assemble it correctly
    and perhaps start your own business
    Thanks for watching. Like this video and subscribe to our channel and we’ll see you in the next one!

    Send your message to us:

    INQUIRY NOW
    • * CAPTCHA: Please select the Cup

    Related Products

    INQUIRY NOW
    • * CAPTCHA: Please select the Tree

    WhatsApp Online Chat !