7 Years manufacturer Mono-Crystalline 40W Solar Panel Wholesale to Algeria
Short Description:
Persisting in "High quality, Prompt Delivery, Competitive Price", we have established long-term cooperation with clients from both overseas and domestically and get new and old clients' high comments for 7 Years manufacturer Mono-Crystalline 40W Solar Panel Wholesale to Algeria, We sincerely welcome overseas customers to consult for the long-term cooperation and the mutual development.
Mono-Crystalline 40W Solar Panel
Technical parameter
Maximum Power(W) 40W
Optimum Power Voltage(Vmp) 18.21V
Optimum Operating Current(Imp) 2.20A
Open Circuit Voltage(Voc) 21.83V
Short Circuit Current(Isc) 2.40A
Mechanical Characteristics
Cell Type Mono-crystalline 125×62.5mm
No of Cell 36 (4x9pcs)
Dimensions 636x554x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*62.5mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
A glitter refill based on Calcium Chloride to create a high specific gravity solution to support glitter. The colour is inkjet refill ink with a few drops of magenta and about ten drops of yellow to give a bright tungsten-friendly orange colour.
There are various grades of calcium chloride, and the best choice is food-grade as it is very pure, but the stuff I got was “hexahydrate” (six molecules of water?) and very slushy. I guess if you could get pure CaCl2 in “dihydrate” form (which is very dry and white) it would require much less weight of the calcium chloride to water. As it is, it required only about 300ml of water to 1kg of the slushy calcium chloride.
The choice of glitter is important too. It should be coated glitter which has the layer of clear plastic, a metallisation layer and a protective coating that prevents the metal from tarnishing or corroding in the strong solution. Fortunately most common glitters on ebay seem to be coated. Some coloured glitters lose their coloured coating into the water, so I tend to recommend using plain silver glitter.
part 2 of how we install our clips. $2 per clip, every 18-20 inches, works on all solar panels. Simple, fast, easy! call today
719-493-6654
