6 Years manufacturer Mono-Crystalline 50W Solar Panel Factory in Tajikistan
Short Description:
We are committed to providing easy,time-saving and money-saving one-stop purchasing service of consumer for 6 Years manufacturer Mono-Crystalline 50W Solar Panel Factory in Tajikistan, Welcome your visiting and any your inquires,sincerely hope we can have chance to cooperate with you and we can build up long well business relationship with you.
Technical parameter
Maximum Power(W) 50W
Optimum Power Voltage(Vmp) 18.72V
Optimum Operating Current(Imp) 2.67A
Open Circuit Voltage(Voc) 22.83V
Short Circuit Current(Isc) 2.94A
Mechanical Characteristics
Cell Type Monocrystalline 125×62.5mm
No of Cell 36 (4x9pcs)
Dimensions 636x554x25mm
Weight 4.2Kg
Front Glass 3.5mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
We are quite very pleased to have been aspect of the growth of a new solar panel program in excess of the previous 12 months, Solfit, most effective of luck on your start.
This is an all new program of slate and tile roof integrated solar photovoltaic panel installation. Supplying a quite lower profile, the most effective aesthetic look readily available with the relieve of a special top rated down fitting program.
This is a Q & A video explaining the basics of the Zero Export / Grid export control units that EBA Solar has available for install on grid connect solar systems that are not permitted to export any power to the grid.
The Zero Export / Grid Export Control Unit works by measuring the load drawn on a house using a current transformer on the mains. Once export to the grid is detected on the mains, the Zero Export / Grid Export Control Unit begins operation by switching in a sequence of relays which switch on selected loads to use up the excess solar power being produced. If the excess solar is still greater than the load being drawn then the control unit will cut the connection of the grid from the inverter. This will stop the solar power exporting to the grid.
Another option of stopping export is to reduce the amount of solar into the inverter by disconnecting one string of the PV when grid export is started. This option is only available for installations that have more than one solar PV array installed.
If you would like more information on the Zero Export / Grid Export Control Unit that EBA Solar has developed, you can contact us on 1300 799 542.
Alternatively you can email us at info@ebasolar.com.au
Visit our website – www.ebasolar.com.au
