2016 High quality Poly-crystalline Solar Panel 5W in Uzbekistan
Short Description:
Innovation, quality and reliability are the core values of our company. These principles today more than ever form the basis of our success as an internationally active mid-size company for 2016 High quality Poly-crystalline Solar Panel 5W in Uzbekistan, We will do our best to meet your requirements and are sincerely looking forward to developing mutual beneficial business relationship with you!
Poly-crystalline Solar Panel 5W
Technical parameter
Maximum Power(W) 5W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.56A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.62A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (3x6pcs)
Dimensions 175x270x18mm
Weight 0.65KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
The buildup of a warm flat roof starts with a good vapour barrier followed by insulation then more decking or just the roofing materials depends on if you want the roof soft or solid. Just what vapour barrier to use is not that clear. Is the silver foil to the back of the insulation OK to use for the vapour barrier? Is a sheet of plastic OK?
Go to some manufacturers websites and they will have several different vapour barriers. Unfortunately the answer is “depends on your roof and your property” calculations should be undertaken for each and every project, if not then the better the vapour barrier is, the more chances of it being correct.
The detailing of the warm roof is very important if gaps in the insulation are left cold bridging can occur and potentially sweating could happen.
Warm roof technology is still evolving so; please make sure your roof understands what he is doing we find that we get lots of phone call from the public explaining that their roofer has installed a warm roof with ventilation is this correct? NO.
For more information, please go to my website. http://www.londonflatroofing.co.uk/warm-roof-explained/
Music: “Lifted” -Siriusbeat
https://siriusbeat.com/track/855328/ep-76-royalty-free-music-dubstep-electro-lifted?autostart=true
