2016 Good Quality Mono-Crystalline 200W Solar Panel Factory from Myanmar
Short Description:
With reliable quality process, good reputation and perfect customer service, the series of products produced by our company are exported to many countries and regions for 2016 Good Quality Mono-Crystalline 200W Solar Panel Factory from Myanmar, With the aim of "compete with good quality and develop with creativity" and the service principle of "take customers' demand as orientation", we will earnestly provide qualified products and good service for domestic and international customers.
Mono-Crystalline 200W Solar Panel
Technical parameter
Maximum Power(W) 200W
Optimum Power Voltage(Vmp) 37.29V
Optimum Operating Current(Imp) 5.36A
Open Circuit Voltage(Voc) 45.48V
Short Circuit Current(Isc) 5.89A
Mechanical Characteristics
Cell Type Monocrystalline 125x125mm (5 inch)
No of Cell 72 (6x12pcs)
Dimensions 1580x808x35mm
Weight 14.5Kg
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.47%
Temperature Coefficients of Voc: -0.389%
Temperature Coefficients of Isc: 0.057%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 125*125mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
EIM COATECH
HASIVIM 18 ST’ PETCH TIKVA, ISRAEL
03-9208200/250
EIM COATECH, specializes in providing solutions for bonding, gluing and insulation of components and wiring on PCB.
Depending on customer requirements, unique bonding processes are made to allow components, circuits and electronic systems provided high survival capability in extreme conditions of vibration and hit.
The work is done through technological means and pneumatic systems in order to provide precise work and high quality.
Bonding processes are made using a variety of adhesives for bonding and gluing electronic wiring and components which is environmentally friendly and approved for using by any military industries in Israel.
After the bonding process, the circuits are tested according to IPC standard – 610.
พลังงานฟรีที่ใช้ไม่มีวันหมด แต่ต้นทุนครั้งแรกสูงเกินจนหลายคนไม่สนใจ แต่มาทุกวันนี้เทคโนโลยี่พัฒนามากขึ้นราคาอุปกรณ์ถูกลงมาก ถึงเวลาแล้วหรือยังที่คนทั่วไปสามารถนำมาใช้ตามอาคารบ้านเรือน คุ้มค่าหรือไม่ ร่วมหาคำตอบพร้อมๆกัน กับ สมชาย DIY
www.Facebook.com/somchaidiy/
Email somchai.diy@gmail.com
