2016 Good Quality Mono-Crystalline 150W Solar Panel for Egypt Importers
Short Description:
With a complete scientific quality management system, good quality and good faith, we win good reputation and occupied this field for 2016 Good Quality Mono-Crystalline 150W Solar Panel for Egypt Importers, Any requires from you will be paid with our best attention!
Mono-Crystalline 150W Solar Panel
Technical parameter
Maximum Power(W) 150W
Optimum Power Voltage(Vmp) 17.92V
Optimum Operating Current(Imp) 7.83A
Open Circuit Voltage(Voc) 21.86V
Short Circuit Current(Isc) 8.59A
Mechanical Characteristics
Cell Type Monocrystalline 156x156mm (6 inch)
No of Cell 36 (4x9pcs)
Dimensions 1485x668x35mm
Weight 11.6KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Junction box IP65 Rated
Output Cable TUV 1×4.0mm2/UL12AWG,Length:900mm
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 15A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Mono-crystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Polycrystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
For more Information Visit
http://agradesolarsolutionsaustralia.com.au/
Mobile: 0419 889 555
Address: P.O Box 41 Rosanna Vic 3084
Fax: (03) 9455 0532
Email: craig@agssa.com.au
ABN: 24605924396
Craig: Hi, I’m Craig from A Grade Solar Solutions Australia. Behind me is an off-grid solar system. Now, that means that there is no power from the grid connected to this house whatsoever. This house is completely self-sufficient.
Now, how we come to designing this system so that you don’t run out of power is we sit down, we do a load assessment which means we look at all the appliances in your house, the amount of light you’re going to have, the power consumption of all your appliances and your lights, the times of days, winter and summer that they’re going to be on and not going to be on, then we will design the amount of solar we need and the size of the battery bank that you require.
Now, this is not something that’s the same for two people. Everybody has different usages, different needs, so these systems need to be tailor made specifically for your usage, and it is very possible to do that and again, you’ll be self-sufficient, no electricity bills, no grid power, all your own power made.
Topics: solar energy, solar panel, solar panel install, solar panel installation australia, solar panels, off-grid, on-grid, solar solutions, wind power, solar power systems, renewable energy, green energy
This is a very simple Audio Amplifier for laptop and mobile phones. and very easy to make at home. it can be operated at 12V-DC to 24V-DC. you can make it portable by using rechargeable batteries. this circuit is for mono application. if you want stereo, just make an other circuit same like this and connect it with this in parallel by combining both ground wires. please like, share & subscribe…
enjoy!
PCB MAKING PROCEDURE:
MINI DRILL MACHINE FOR MAKING HOLES:
