2016 China New Design Mono-Crystalline 50W Solar Panel Factory for London

Our company puts emphasis on the management, the introduction of talented personnel, and the construction of staff building, trying hard to improve the quality and liability consciousness of staff members. Our company successfully attained IS9001 Certification and European CE Certification of 2016 China New Design Mono-Crystalline 50W Solar Panel Factory for London, We will supply best quality, the most market competitive price, for every new and old customers with the most perfect green services.

Technical parameter

Maximum Power(W)                        50W

Optimum Power Voltage(Vmp)        18.72V

Optimum Operating Current(Imp)    2.67A

Open Circuit Voltage(Voc)               22.83V

Short Circuit Current(Isc)                 2.94A

Mechanical Characteristics

Cell Type Monocrystalline              125×62.5mm

No of Cell                                        36 (4x9pcs)

Dimensions                                     636x554x25mm

Weight                                            4.2Kg

Front Glass                                     3.5mm,High Transmission, Low Iron,Tempered Glass

Junction box                                    IP65 Rated

Output Cable                                   TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                  600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.47%

Temperature Coefficients of Voc:        -0.389%

Temperature Coefficients of Isc:           0.057%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Mono-crystalline solar cell 125*125mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

Spiitz doesn’t mess around. Due diligence was exerted in researching and sourcing the highest quality material at the lowest possible price. We collaborated electronically over the weeks leading up to the build with Spiitz driving the design and me providing relevant links and technical advice.

Spiitz had everything we needed on hand except a few weatherproof electrical boxes and some odds and ends I brought along from my shop. He chose high density Tri-Chip High Output strip 300 LED elements per 5 meter length. Each LED element has three diodes, Red, Green, and Blue. 4 conductor ribbon wire is standard for installation.

Testing revealed a substantial impedance over 60 foot of 22 gauge ribbon wire (1.1 ohm) that resulted in a substantial difference in light output. Due to the construction and amp requirements of a 5 meter strip of 300 LED material a loop back to the controller is recommended every 5 meters.

One run of lighting needed to be an uninterrupted strip of 23 feet. To minimize and balance impedance we located the controller in the physical center of our lighting below the deck and used 18 gauge multiconductor wire from the controller to weatherproof boxes. We then used terminal blocks to make the connection to pairs of ribbon wires run up through the deck. We powered the 23 foot strip from each end to ensure even lighting,

No details were left unattended, every lead was tinned, every connection covered in heat shrink. On first power every LED lit simultaneously as we had expected. Lighting was perfectly even throughout.

The strips install into a tiny aluminum extrusion set into a dado channel made on my table saw. It would have been impossible to run these 16 foot 2 x 8 pressure treated rails through my little saw without Spiitz expertly tailing the long end of the lumber. Every step of the way Spiitz was there soaking up the process and putting his rather large collection of tools to use.

And without the hospitality extended by his Wife, I would have been sleeping under that deck. I hope you guys enjoyed the video. Sub Like Share

http://clickbank.tiendadesdecasa.com/

http://traficoweb.tiendadesdecasa.com/99foryou

The Sunforce 170 Watt Crystalline Solar Kit comes full with two 85 watt solar panels, 30A digital charge controller, 200W inverter, wiring, brackets, screws, and a voltage tester.

https://www.youtube.com/watch?v=owmOv…

http://pinterest.com/odarawoom/solar-…

http://www.facebook.com/pages/Solar-E…

The solar panels have aluminum frames for extended outdoor use. The bypass diode minimizes the energy drop caused by shade. This kit is ideal for RVs, residences, boats, back-up and remote electrical power use, 12 Volt battery charging, and solar energy stations, pumps, and lighting equipment.

The solar panels have high efficiency Crystalline solar cells. This kit is effortless to install and fully maintenance-free of charge.
The solar panels are completely weatherproof, and come with a 25-12 months constrained guarantee. Connect multiple panels for much more power.
The Sunforce 170 Watt Crystalline Solar Kit comes total with two 85 watt solar panels, 30A digital charge contoller, 200W inverter, wiring, brackets, screws, and a voltage tester.

The solar panels have aluminum frames for extended outdoor use. The bypass diode minimizes the electrical power drop brought on by shade. This kit is ideal for RVs, homes, boats, back-up and remote energy use, twelve Volt battery charging, and solar electrical power stations, pumps, and lighting products.

The solar panels have higher efficiency Crystalline solar cells. This kit is simple to set up and completely servicing-free of charge. The solar panels are totally weatherproof, and come with a 25-year restricted guarantee. Connect multiple panels for a lot more electrical power.

Sunforce Solar Panels are efficient in areas of each higher and reduced sun exposure, generating them best for use in the United States
Sunforce crystalline panels convert sunlight into an electrical existing they do not actually keep energy.

These panels are mostly utilized to recharge all types of twelve Volt batteries, which includes lead-acid automotive batteries, deep-cycle (traction sort) batteries, gel-cell batteries, and heavy-duty (stationary sort) batteries. When using these solar panels to run appliances on a regular basis, the use of deep-cycle marine batteries is advisable.

This kind of battery is developed to withstand the regular charge and discharge cycles related with solar panel use.

Substantial efficiency crystalline solar panels

Best for 12 volt battery charging and use in remote spots

Entirely weatherproof for added durability

Connect several kits for more power

Kit consists of: two x 85 watt solar panels, 30 A digital charge contoller, 200 W
inverter, wiring, brackets, screws, and a voltage tester