2 Years\\\\\\\\\\\\\\\’ Warranty for Poly-crystalline Solar Panel 100W Supply to Botswana

We support our buyers with ideal high quality products and high level service. Becoming the specialist manufacturer in this sector, we have gained rich practical experience in producing and managing for 2 Years\\\\\\\\\\\\\\\’ Warranty for Poly-crystalline Solar Panel 100W Supply to Botswana, We believe that a passionate, innovative and well-trained team will be able to establish good and mutually beneficial business relationships with you soon. Please feel free to contact us for more details.

Technical parameter

Maximum Power(W)                       100W

Optimum Power Voltage(Vmp)        17.87V

Optimum Operating Current(Imp)    5.60A

Open Circuit Voltage(Voc)               21.45V

Short Circuit Current(Isc)                 6.17A

Mechanical Characteristics

Cell Type Polycrystalline                  156x104mm (6 inch)

No of Cell                                36 (4x9pcs)

Dimensions                            1120x678x35mm

Weight                                    9.7KGS

Front Glass                            3.2mm,High Transmission, Low Iron,Tempered Glass

Junction box                                      IP65 Rated

Output Cable                                     TUV 1×4.0mm2/UL12AWG,Length:900mm

Temperature and Coefficients

Operating Temperature(°C):                -40°C ~ + 85°C

Maximum System Voltage:                   600V(UL)/1000V(IEC) DC

Maximum Rated Current Series:         15A

Temperature Coefficients of Pmax:     -0.435%

Temperature Coefficients of Voc:        -0.35%

Temperature Coefficients of Isc:           0.043%

Nominal Operationg Cell Temperature (NOCT): 47+/-2°C

Materials of solar panel

1).Solar Cell——Polycrystalline solar cell 156*52mm

2).Front Glass——-3.2mm, high transmission, low iron, tempered glass

3).EVA——-excellent anti-aging EVA

4).TPT——-TPT hot seal made of flame resistance

5).Frame——anodized aluminum profile

6).Junction Box——-IP65 rated, high quality, with diode protection

Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.

Features

1. High cell efficiency with quality silicon materials for long term output stability

2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures

3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance

4. Both Poly-crystalline and Mono-crystalline

5. Excellent performance in harsh weather

6. Outstanding electrical performance under high temperature and low irradiance 

Quality assurance testing

Thermal cycling test

Thermal shock test

Thermal/Freezing and high humidity cycling test

Electrical isolation test 

Hail impact test

Mechanical, wind and twist loading test

Salt mist test

Light and water-exposure test

Moist carbon dioxide/sulphur dioxide

In this video I take my first voltages from my panel. It consists of 20 0.55V panels in series. These photovoltaic cells produce slightly more than 0.55V, so I hope to get 12V from the solar panel in full sun.

In this test with some clouds over the sun I was getting a respectable 10.5V In the ideal situation I would have been able to place 2 more cells into the box, but I just couldn’t get them to fit.

I have enough solar cells left over for another panel, but I’ll save those for when I have a different soldering iron to use.

This panel with all current materials will place me well under the dollar per watt range.

Build your own exterior windshield sun screen to help keep the sun’s heat out, but still provide some visibility from inside the boat’s cabin. These exterior mesh vinyl fabric shades have the added benefit of giving you privacy* while your boat is moored. Even though you can see through the mesh fabric from inside the boat’s cabin, people on the outside cannot see through the mesh fabric. Block the HEAT, not your VIEW!

In this video we will show you how to pattern for the shades, sew a facing & binding on the edges and then how to install snaps and adhesive snap components called YKK Snads to the boat (a no drill solution for a snap stud).

Order vinyl mesh fabric and supplies from: http://www.sailrite.com

* NOTE – The visibility through the screen is always determined on the side of the screen which has the least amount of light. For example; At night if the lights are on full power inside a boat’s cabin the people on the outside will see silhouettes of persons inside the boat’s cabin.

HOW TO MAKE A BOAT WINDSHIELD SUN SHADE CHAPTERS:
Calculating Fabric & Patterning Material Required – 1:12 min
Making the Pattern – 3:55 min
Patterning Marine Vinyl Mesh – 18:54 min
Creating Facings – 21:37 min
Basting & Sewing Facing – 25:09 min
Joining Shade Halves – 28:47 min
Sewing Binding on Sides – 32:22 min
Creating Velcro Flaps – 35:37 min
Making Side Panels – 40:20 min
Installing SNADs – 48:50 min
Installing Gypsy Studs – 49:46 min
Positioning & Installing Snaps – 58:40 min
Overview 1:17:13 min
Materials List – 1:20:31 min

MATERIALS LIST:
Filament Strapping Tape 3/4″ – Item # 5643
Seamstick 3/8″ Basting Tape for Canvas – Item # 129
Dura Skrim Patterning Material – Item # 103134
Marine Vinyl Mesh Fabric from Sailrite we used Phifertex Plus Black – Item # 124511
Seamstick 3/8″ Basting Tape for Sailmaking & Vinyl – Item # 659
Polyester V-92 Thread or Profilen PTFE Lifetime Thread we used Profilen Black – Item # 107130
Sunbrella Acrylic Binding from Sailrite we used Black 1″ – Item # 12400
Polyester Loop 1″ – Item # 105036 (black), #478100 (white)
Polyester Hook 1″ – Item # 105035 (black), #473100 (white)
YKK® SNAD® 25mm Adhesive Backed Flexible Base Stud – Item # 103649 (black), #104451 (clear), #103652 (white)
YKK® SNAD® 40mm Adhesive Backed Domed Stud – Item # 103587 (black), #103354 (white)
SnapRite® Gypsy Stud 3/16″ Barrel – Item # 104236
DOT Snap Fastener Normal Action Socket – Item # 333050
SnapRite® Snap Fastener Button Silver 11/64″ Barrel – Item # 104151

TOOLS LIST:
Tape Measure 120 Inch – Item # 102986
Multi Use Pins 1 1/2″ – Item # 102985
Scribe-All Water Soluble Marking Pencil White – Item # 120681 or Fabric Marking Pencil Yellow – Item # 111002
Gingher Scissors Right Handed – Item # 19104
Sailrite Canvas Patterning Ruler – Item # 107040
Sailrite Ultrafeed LS-1 PLUS Walking Foot Sewing Machine – Item # 300502 or Sailrite Ultrafeed® LSZ-1 PLUS Walking Foot Sewing Machine – Item # 300602
Deluxe 5 1/2″ Magnetic Sewing Guide – Item # 103597
1″ Swing Away Straight Binder – Item # 100103
Sailrite Edge Hotknife Package (110 Volt) – Item # 103800
3M® Tape Primer 94 – Adhesive Promoter – Item # 104166 – 8oz or Item # 120671 – Ampule
3M® Silane Glass Treatment AP115 4oz – Item # 120678
Quick Fit Kit in Waterproof Box – Snap Positioning System – Item # 102565
Sailrite SnapRite System (4 Dies & 100 Mandrels) – Item # 104237
Tape Measure, Marker, Pop Rivet Tool, Office Clamps

Order vinyl mesh fabric and supplies from: http://www.sailrite.com