13 Years manufacturer Poly-crystalline Solar Panel 5W Belarus Manufacturers
Short Description:
Dedicated to strict quality control and thoughtful customer service, our experienced staff members are always available to discuss your requirements and ensure full customer satisfaction for 13 Years manufacturer Poly-crystalline Solar Panel 5W Belarus Manufacturers, If you are interested in any of our products or would like to discuss a custom order, please feel free to contact us.
Poly-crystalline Solar Panel 5W
Technical parameter
Maximum Power(W) 5W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.56A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.62A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (3x6pcs)
Dimensions 175x270x18mm
Weight 0.65KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
My Solar Panels At Home 200w Grid Tie Inverter Amorpheus 12v 111w 8.5a M2U01564
Part 6 of the High Altitude Balloon project. Final assembly of the whole Arduino data logger and transferring it over to a PCB proto/perf board. Some placement fun, soldering and lots of hot glue!
Basically the plan is to launch a helium filled latex weather balloon to approximately 100,000 feet carrying a payload of cameras, experiments and data logging equipment. This will put it in the realm of near-space/stratosphere.
——————————————————
My Website & Forum:
http://mkme.org
Store:
http://www.mkme.org/index.php/store/
—————————————————–
Some of my popular playlists:
+ DIY Brain Computer/Robot Interface & Tutorials: http://goo.gl/pi0AFV
+ InMoov DIY 3D printed humanoid robot: http://goo.gl/j9DS4U
+ Arduino Projects and Tutorials: http://goo.gl/6GmwcZ
+ Arduino Autonymous Robot build: http://goo.gl/WUkpmC
+ Software Defined & Amateur Radio & Tutorials http://goo.gl/MQY223
+ DIY mission to space: http://goo.gl/3480Ev
+ DIY home cockpit flight simulator: http://goo.gl/85lZGR
+ Interfacing Arduino to flight simulator & Tutorials: http://goo.gl/syaETt
——————————————————
Get Social!
https://plus.google.com/+EricWilliam
http://twitter.com/MKmeOrg
http://www.facebook.com/EricWilliam13
Cheers!
