11 Years Factory Poly-crystalline Solar Panel 5W to Burundi Factories
Short Description:
With this motto in mind, we have become one of the most technologically innovative, cost-efficient, and price-competitive manufacturers for 11 Years Factory Poly-crystalline Solar Panel 5W to Burundi Factories, We warmly welcome customers from all over the world for any kind of cooperation with us to build a mutual benefit future. We are devoting ourselves wholeheartedly to offer customers the best service.
Poly-crystalline Solar Panel 5W
Technical parameter
Maximum Power(W) 5W
Optimum Power Voltage(Vmp) 9V
Optimum Operating Current(Imp) 0.56A
Open Circuit Voltage(Voc) 10.8V
Short Circuit Current(Isc) 0.62A
Mechanical Characteristics
Cell Type Polycrystalline
No of Cell 18 (3x6pcs)
Dimensions 175x270x18mm
Weight 0.65KGS
Front Glass 3.2mm,High Transmission, Low Iron,Tempered Glass
Temperature and Coefficients
Operating Temperature(°C): -40°C ~ + 85°C
Maximum System Voltage: 600V(UL)/1000V(IEC) DC
Maximum Rated Current Series: 10A
Temperature Coefficients of Pmax: -0.435%
Temperature Coefficients of Voc: -0.35%
Temperature Coefficients of Isc: 0.043%
Nominal Operationg Cell Temperature (NOCT): 47+/-2°C
Materials of solar panel
1).Solar Cell——Polycrystalline solar cell 156*156mm
2).Front Glass——-3.2mm, high transmission, low iron, tempered glass
3).EVA——-excellent anti-aging EVA
4).TPT——-TPT hot seal made of flame resistance
5).Frame——anodized aluminum profile
6).Junction Box——-IP65 rated, high quality, with diode protection
Superiority: high quality anodized aluminum frame, high efficiency long life, easy installation, strong wind resistance, strong hail resistance.
Features
1. High cell efficiency with quality silicon materials for long term output stability
2. Strictly quality control ensure the stability and reliability, totally 23 QC procedures
3. High transmittance low iron tempered glass with enhanced stiffness and impact resistance
4. Both Poly-crystalline and Mono-crystalline
5. Excellent performance in harsh weather
6. Outstanding electrical performance under high temperature and low irradiance
Quality assurance testing
Thermal cycling test
Thermal shock test
Thermal/Freezing and high humidity cycling test
Electrical isolation test
Hail impact test
Mechanical, wind and twist loading test
Salt mist test
Light and water-exposure test
Moist carbon dioxide/sulphur dioxide
My AETPL 300Watt NABARD Model III Solar Power System Configuration:
1. Andromeda SOLITE Smart Hybrid Solar Inverter Model NO. NB824 800VA (24v) Inverter
2. Cable 2C x 2.5Sqmm – 15Mtrs.
3. Cable 1C x 2.5Sqmm – 1Mtrs.
4. Module Mounting Structure – 1 Sets
5. Exide Batteries: 2x150AH = 300AH Capacity with Double Battery Tubular Trolley
6. Andromeda PV Module – AB150 (Mono Model)
2x150Watt = 300Watt Solar Panels (These are Mono Panels. Mono are better then Poly Panels Trust me)
This solar system will cost you Rs75000 and the government will give you Rs30000 subsidy only on this solar syatem.
Have Any Questions just ask in the comment section.
Thanks
Руководитель проекта Артем Токранов рассказывает о том, что из себя представляет телефонная социальная сеть “НЕБО” и наглядно показывает как с ней работать.
(1 часть)
www.nebo.ws
